Mac OS X quick setup guide quick setup guide
for your computer to dial The World

These instructions will set up a Mac OS X computer to dial The World, using PPP.

We also have more detailed instructions (in text form). Please refer to them if your computer has not yet been configured for any Internet access (such as a new computer or a new installation of Mac OS X) or if you can't find any of the items this walkthrough describes. If you need further help, contact Technical Support.

1.

Open the System Preferences (go to Apple Menu and select "System Preferences") and click the Network icon, shown below. (The icons in your System Preferences window may be shown in a different order.)

2.

Set the "Show:" field to "Internal Modem".

Click the "TCP/IP" tab. Set "Configure:" to "Using PPP" (as shown below.) You do not need to fill in the other boxes.

4.

Click the "PPP" tab. Fill it in as shown below, except with your own personal information in place of the examples. (You can find a modem access number for The World with the blue form below the picture.) You may need to put a "1" in front of it for long distance, or "*70," in front of it if you need to disable Call Waiting.

Area Code: (or) State: Alaska Alabama Arkansas Arizona California Colorado Connecticut D.C. Delaware Florida Georgia Hawaii Iowa Idaho Illinois Indiana Kansas Kentucky Louisiana Massachusetts Maryland Maine Michigan Minnesota Missouri Mississippi Montana North Carolina North Dakota Nebraska New Hampshire New Jersey New Mexico Nevada New York Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Virginia Vermont Washington Wisconsin West Virginia Wyoming

Your password will be displayed as dots; If you don't want to have to type it again each time you connect, check the box marked "Save Password".

5.

Click the "Modem" tab.

Set the "Modem:" field to reflect your modem type (if it's not already set. Most computers will already have the built-in modem selected.)

Make sure the box for "Enable error correction and compression in modem" is checked.

You can enable or disable the other check boxes as you wish.

6.

Click the "Apply Now" button at the bottom of the window, and then close the "System Preferences" window.

Your PPP setup is done!

To connect:

To connect or disconnect, you can use the "Internet Connect" program.

Open the Internet Connect application (in any Finder window, click the "Applications" icon at the top, then double-click "Internet Connect"). It will show some of the settings you've entered. Enter your password if necessary, and click "Connect". Your computer will dial and connect to the Internet.

Any Web browser (such as Internet Explorer) should work now.

You will need to set up mail and news settings in any programs you use for mail or news. To set up Apple's Mail program (included with Mac OS X) see the "Mail" section of our more detailed instructions.

For other mail or news programs, you will need to enter the settings shown below. (You can enter these settings in the Internet panel of System Preferences and most programs will adopt them.)